Water in a house or an irrigation system is supposed to travel in one direction. A sudden drop in pressure on the supply side can, in some setups, let water flow backward. A backflow preventer is a device that stops that from happening. You will often see one on an irrigation system, or on certain other connections a water agency requires.
When a backflow preventer leaks, fails to close, or is damaged, it needs repair or replacement. That is the work on this page. Many water agencies also require these devices to be tested on a schedule. Testing is a separate, often certified, task. KT Plumbing repairs backflow preventers. If your agency has sent a testing notice, we can talk with you about the repair and what you will need for the test itself.
Call or text (831) 917-9129. A photo of the device and any tag or notice you received is helpful.
What backflow repair includes
The scope is the device and the piping around it, agreed before work starts.
- A look at the device
- We look at the backflow preventer, how it is piped, and what is failing — a leak, a damaged part, or a device that is no longer doing its job.
- Repair or replacement of the preventer
- We repair what can be repaired, or replace the device when that is the sound path, as agreed in the scope.
- The piping around it
- Valves and connections around the preventer are part of making the repair last.
- A plain conversation about testing
- If your water agency requires a test, we will talk through what you still need after the repair.
Signs a backflow preventer may need repair
Some problems show as leaks. Others show up when a test fails or a notice arrives.
- Water leaking from the device
- Drips or a discharge from the preventer, especially after irrigation runs, are a reason to look at it.
- A damaged or stuck valve
- Handles that will not turn, cracked bodies, or fittings that have failed need attention.
- A notice from the water agency
- Agencies often require a working, tested preventer on irrigation and certain other connections. A failed test or an overdue notice is a reason to look at the device, even if we are not the tester.
- Irrigation that was recently changed
- A new or altered irrigation hookup may need a preventer, or may have one that was not piped correctly.
Repair, replacement, and testing
These are related, but they are not the same job.
- A leaking or damaged preventer is a repair or a replacement of the device.
- A test checks whether the device still prevents backflow. Many water agencies require that test on a schedule, and it is often done by a certified tester.
- KT Plumbing does the repair work. If you need a test, we can help you understand what to arrange.
- Do not assume a repair automatically satisfies an agency notice. Ask the agency what they need if you are not sure.
Call or text (831) 917-9129 to talk through the job. Texting is fine.
How the job works
- Call or textTell us what you are seeing, and send a photo of the device or the notice if you have one.
- Look at the preventerWe look at the device and the piping and explain the repair.
- Complete the agreed workWe repair or replace the preventer as scoped.
- Talk through any testing still neededIf your agency requires a test, we will say so clearly rather than leaving that implied.
How to prepare
- If you have a notice or a tag on the device, keep it handy or photograph it.
- Note whether the preventer is on irrigation, a boiler, or another hookup.
- Clear access around the device if it sits in a box or a side yard.
Backflow devices in this area
Irrigation systems are a frequent place to find a backflow preventer, and they sit outdoors where weather and hard water can be hard on the device.
Each water agency has its own rules about when a preventer is required and how often it must be tested. A rule in one city may not match the next. We will talk through what applies to your address.
Where we work
Monterey and Santa Cruz Counties, from Santa Cruz to Greenfield.
Monterey Peninsula
Monterey, Pacific Grove, Pebble Beach, Carmel-by-the-Sea, Carmel Valley, Carmel Highlands, Seaside, Marina, Sand City, Del Rey Oaks
Salinas & North Monterey County
Salinas, Spreckels, Prunedale, Castroville, Moss Landing, Aromas
Salinas Valley
Chualar, Gonzales, Soledad, Greenfield
Santa Cruz County
Pajaro, Watsonville, Freedom, Corralitos, La Selva Beach, Aptos, Rio del Mar, Capitola, Soquel, Live Oak, Santa Cruz
Working with KT Plumbing
- Call or text (831) 917-9129 about backflow repair.
- We repair the device and the piping around it.
- If you have a testing notice, we can talk through the repair and what the test involves.
- The scope is agreed before work starts.
Related services
Common questions
What does a backflow preventer do?
It stops water from flowing backward into the clean supply. That can matter when pressure drops on the street side, or when an irrigation or other system could otherwise push water the wrong way.
Do you test backflow preventers?
Many water agencies require periodic testing, often by a certified tester. KT Plumbing repairs backflow preventers. If you have a testing notice, we can talk through the repair and what you will still need for the test.
Why is my backflow preventer leaking?
The device can discharge a small amount of water as part of how some types work, but a steady leak, a cracked body, or a drip at a fitting is usually a repair issue. A photo helps us tell which you are seeing.
Is this only for irrigation?
Irrigation is a common place to find a preventer, but some other connections need one as well. If you are not sure what you have, send a photo.
Will a repair satisfy my water agency?
Not always. Some notices are about a failed test or a missing test, which is different from a repair. Check with the agency if you are unsure, and we will be clear about what our work covers.
What area do you serve?
Monterey and Santa Cruz Counties, from Santa Cruz to Greenfield. The towns we serve are listed in the Where we work section on this page.
Still have a question? Call or text (831) 917-9129.